| | 316 | To prove the functionality and benefits offered by the Check Management Protocol Suite, a demonstration employing multiple monitors on RZRaven, Sparrow and Sensinode islands will be used. These monitors will be working at the same time, switching whenever one of them will fail. Seamless operation, and the avoidance of service interruptions or delays due to failures occurring in the network will be shown by the Check Management Protocol Suite. The evaluation metric will measure the recovery time after an injected failure. The actual demonstration will provide a failure report after this failure injection. The demonstration will show the comparison of the functionality offered by the SENSEI system with and without the Check Protocol Suite. During the demonstration, some of the services offered by all the WSAN islands should become unavailable when the Check framework is not used upon failure injection. While Check is used or activated however, all services should be available and scheduled properly across all the WSAN islands in the system where they are installed. The behavior of all the nodes will be continuously visible remotely through the monitoring component of Check. |
