Changes between Version 68 and Version 69 of node-contiki

Timestamp:

Oct 8, 2010, 11:19:49 AM (14 years ago)

Author:

petsku

Comment:

--

node-contiki

@@ -153 +153 @@
 5. Run the gw6c client.
 * /usr/local/gw6c/bin$ sudo ./gw6c
-Leave IPv6 tunnel running, and open a new terminal to program the node with SENSEI-application.
 
 6. Verify that the gw6c created another interface with IPv6 address.
@@ -195 +194 @@
 1. Download and install Contiki-2.4 as instructed in Section 3.1.
 
-**Note: If you want to program a node with source code, please continue to step 2. If you don't need source code or you don't have access to the Sensei SVN, you can program a node with binary file with less steps. If you choose to program a node with binary file, please move to Section "Program Tmote Sky node with binary file".
+**Note: If you want to program a node with source code, please continue to step 2. If you don't need source code or you don't have access to the SENSEI SVN, you can program a node with binary file with less steps. If you choose to program a node with a binary file, please move to Section "Program Tmote Sky node with a binary file".
 
 2. Copy coap/ and sensei/ folders from svn (node-contiki-coap/apps/) to contiki-2.4/apps/