Changes between Version 59 and Version 60 of node-contiki

Timestamp:

Oct 7, 2010, 10:39:29 AM (14 years ago)

Author:

petsku

Comment:

--

node-contiki

@@ -294 +294 @@
 * gateway$ ./bin/sensei-gateway -p 8000 -s sensei-oulu.broker.freenet6.net -d oulu.fi -w island
 
-6. Leave gateway running in the terminal. Turn on the node(s) that you programmed in Section 3.5. Node sends its resource description after it receives router advertisements. This time depends on radvd.conf settings, in this tutorial it was set between 3 and 5 seconds. Gateway prints the resource description when it is received. 
+6. Leave gateway running to the terminal. 
 
 == Test the SENSEI components over the Web ==
 
-Open a browser; be sure that your browser supports IPv6 address.
-
-Test the following URL: You can see all the available resources available at this address. [http://sensei-oulu.broker.freenet6.net:8000]
+Turn on the node(s) that you programmed in Section 3.5. Node sends its resource description after it receives router advertisements. This time depends on radvd.conf settings, in this tutorial it was set between 3 and 5 seconds. Gateway prints the resource description when it is received. 
+
+Open a browser, be sure that your browser supports IPv6 address.
+
+Test the following URL (you can see all the available resources available at this address).
+
+{{{
+http://sensei-oulu.broker.freenet6.net:8000
+}}}
 
 To access the available resource; use the following address, e.g.,