Changes between Version 39 and Version 40 of node-contiki

Timestamp:

Oct 6, 2010, 11:50:05 AM (14 years ago)

Author:

petsku

Comment:

--

node-contiki

@@ -336 +336 @@
 * Last command starts the gateway, keep it running in the terminal.
 
-Turn on the node(s) that you programmed in Section 3.5. Node sends its resource description after it receives router advertisements. This time depends on radvd.conf settings, usually between 5 and 15 seconds. Gateway prints the resource description when it is received. 
+Turn on the node(s) that you programmed in Section 3.5. Node sends its resource description after it receives router advertisements. This time depends on radvd.conf settings, in this tutorial it was set between 3 and 5 seconds. Gateway prints the resource description when it is received. 
 
 == Test the SENSEI Components over the Web ==
@@ -346 +346 @@
 To access the available resource; use the following address, e.g.,
 {{{
-http://sensei-oulu.broker.freenet6.net:8000/0212-7400-10c5-51f7/p/rssi
+http://sensei-oulu.broker.freenet6.net:8000/0212-7400-10c5-51f7/p/battery
 
 http://sensei-oulu.broker.freenet6.net:8000/0212-7400-10c5-51f7/a/led1
@@ -355 +355 @@
 
 }}}
+
+[[Image(Screenshot-Battery.png, 65%, center)]] 
+
+[[Image(Screenshot-Temp.png, 65%, center)]] 
 
 **p – Parameter resource