Changes between Version 18 and Version 19 of ZigbeeGateway


Ignore:
Timestamp:
Oct 18, 2010, 3:20:24 PM (14 years ago)
Author:
Sensei
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • ZigbeeGateway

    v18 v19  
    1919* Windows operating system, version XP or upper.
    2020* No special computer performance requirements are needed.
    21 * External Hardware:
     21* External Hardware (one of the following):
    2222       * Zigbee dongle. It has been tested the Zigbee dongle of "Integration" model "IA DAUB-DK1 2400".
    23               * Drivers of this dongle should be properly installed before running the package. After installation, the following library will be available on the path: //STKUSB.dll// and //ZBDLL.dll//. Alternatively these libraries can be copied to the same folder where package is installed.
    24 
     23              * Drivers of this dongle should be properly installed before running the package. After installation, the following libraries should be available on the system path: //STKUSB.dll// and //ZBDLL.dll//. Alternatively these libraries can be copied to the same folder where package is installed.
    2524       * External concentrator, that convert the Zigbee messages into IP for transmitting using TCP/IP protocol.
    26 * IP connection. Make sure that the firewall allows the package to establish a TCP server.
     25* IP connection. Make sure that the firewall allows the package establishing a TCP server.
    2726
    2827== Installation ==
    29 Package is available [https://svn-batch.grid.pub.ro/svn/Sensei-Cookbook/Zigbee_to_Sensei_Gateway here]. Just unzip the package files in a directory. Previously to run this software, it is necessary to adjust the configuration file (see [#Configuration Configuration section]).
     28Package is available [https://svn-batch.grid.pub.ro/svn/Sensei-Cookbook/Zigbee%20to%20Sensei%20Gateway.zip here]. Just unzip the package files in a directory. Previously to run this software, it is necessary to adjust the configuration files (see [#Configuration Configuration section]).
    3029
    3130=== Package Content ===
    … …  
    139138
    140139The software engages to the island, discovers nodes, and for each node it discovers resources, that is, sensors and actuators. This software operates under the following Zigbee configuration:
    141 * It has been tested upon Zigbee 2007. Zigbee Pro should work depending on the Zigbee dongle or concentrator.
     140* It has been tested upon Zigbee 2006. Zigbee Pro should work depending on the Zigbee dongle or concentrator.
    142141* It is needed to known a priori physical Zigbee parameters:
    143142       * Frequency channel number (11 to 26).