Changes between Version 37 and Version 38 of Letibee
- Timestamp:
- Nov 5, 2010, 3:47:40 PM (13 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
Letibee
v37 v38 1 = L etibeeIsland =1 = LETIBEE Island = 2 2 3 3 [[Image(Letibee-Board-Compresse.JPG, 30%, right)]][[Image(letibee_node1_compresse.jpg, 30%, right)]] … … 9 9 == Introduction == 10 10 11 This document describes the LETIBEE-based Wireless Network SENSEI island and in particular how to set it up.12 The LETIBEE network uses some nodes equipped with the LetibeeSoC, on top of which have been put an application11 This document describes the LETIBEE-based Wireless Network in a SENSEI island and in particular how to set it up. 12 The LETIBEE network is composed of RF nodes based on the LETIBEE RF SoC, on top of which have been put an application 13 13 program running over Contiki/RIME stack. 14 14 15 15 == Objectives == 16 16 17 The network at CEA-Leti provides information to an end-user located at a gateway or through the S enseiplatform as shown in the figure below.17 The network at CEA-Leti provides information to an end-user located at a gateway or through the SENSEI platform as shown in the figure below. 18 18 19 19 These information are: … … 25 25 26 26 27 == L etibeeWSAN ==27 == LETIBEE WSAN == 28 28 29 29 The WSAN uses a dedicated communication protocol. Each node communicates with the network not directly but through a virtual connection managed by a gateway ( a sink node and the application platform). … … 274 274 Published data are listed below. 275 275 276 === Published data :===276 === Published data === 277 277 278 278 The communication from the gateway to the end-user is encapsulated in an xml file.