Changes between Version 28 and Version 29 of Letibee
- Timestamp:
- Nov 5, 2010, 1:26:56 PM (14 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
Letibee
v28 v29 16 16 * An estimated map with the measures obtained at each node side. 17 17 18 [[Image(cea_wsan.png, 40%,center)]]18 [[Image(cea_wsan.png, 30%,center)]] 19 19 20 20 … … 25 25 26 26 27 [[Image(network.png, 60%, center)]]27 [[Image(network.png, 50%, center)]] 28 28 29 29 … … 46 46 A view of the stack is shown in the figure below. 47 47 48 [[Image(rime.png, 70%, center)]]48 [[Image(rime.png, 60%, center)]] 49 49 50 50 Modules, used in the application, are described below: … … 75 75 The frame formats transmitted over the air are summarised here after. 76 76 77 [[Image(frame_format.png, 60%, center)]]77 [[Image(frame_format.png, 50%, center)]] 78 78 79 79 ==== Gateway frame format ==== … … 81 81 On the USB port, the APDU is appended with a frame delimiter 0xFF at its beginning, followed by the frame length. 82 82 83 [[Image(frame_usb.png, 50%, center)]]83 [[Image(frame_usb.png, 40%, center)]] 84 84 85 85 * To sink from gateway, the source address is added at its beginning of the APDU.