Changes between Version 5 and Version 6 of AndroidREP


Ignore:
Timestamp:
Oct 20, 2010, 7:49:42 AM (14 years ago)
Author:
Sensei
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • AndroidREP

    v5 v6  
    3535* /sdcard/ericsson/rep/repProperties
    3636* → All paths and file types are configurable on the properties file, but note that for a simple installation and first run, it is required to remove all files and folders under /sdcard/ericsson/sag/ and /sdcard/ericsson/rep/ folders.
    37 * Make sure that wireless network access is enabled on your device. The REP is working with both WiFi and Mobile network, but it is required to have an open port in the wireless network connection firewall. The default port which is setup during the installation is 8182. You can change this port later in the properties file or using the control panel which is explained on the second chapter of this tutorial.
    38 * Enable a location resource on your device (GPS satellites or wireless network location determination). This is an optional requirement which enables SAG to provide location data. In most Android devices, this setting is under Settings>Location>UseWirelessNetwork and Settings>Location>EnableGPSsatellites
    39 * Both SAG and REP are unsigned and non-market applications. It is required to enable installation of “unknown source application” which is found under Settings>Application>UnknownSources
     37* Make sure that wireless network access is enabled on your device. The REP is working with both {{{WiFi}}} and Mobile network, but it is required to have an open port in the wireless network connection firewall. The default port which is setup during the installation is 8182. You can change this port later in the properties file or using the control panel which is explained on the second chapter of this tutorial.
     38* Enable a location resource on your device (GPS satellites or wireless network location determination). This is an optional requirement which enables SAG to provide location data. In most Android devices, this setting is under Settings>Location>{{{UseWirelessNetwork}}} and Settings>Location>EnableGPSsatellites
     39* Both SAG and REP are unsigned and non-market applications. It is required to enable installation of “unknown source application” which is found under Settings>Application>{{{UnknownSources}}}
    4040* If you have installed these applications before, it is required to uninstall them in order to have a clean installation.
    4141* Make sure that the SDcard is available before the installation
    … …  
    172172  * This option is the time in milliseconds which defines the general duration of service delays in between data provision for subscribers. This will put a minimum period for providing data for a subscriber. So for example if this option is set to 2000 milliseconds and a subscriber requests for data in every 10 millisecond, then the REP will send the data only every 2000 milliseconds. This will affect the efficiency of the application.
    173173* {{{mngSubsc=5}}}
    174   * this is a complementary option for the previous option. In the example that a subscriber asks for data with a very small period, the REP only sends the data to that subscriber with its own MinSubscPeriod duration. But in every interval, in can provide a number of data for that subscriber. For example, having a value 5 for this option means that after the MinSubscPeriod, there will be 5 posts of data from the REP to that subscriber based on its request. Changing this value requires a good understanding about the scenario. Otherwise don't modify this option. This value can range from 1 to 10. A value more than 10 can cause long latencies with the service for subscribers.
     174  * this is a complementary option for the previous option. In the example that a subscriber asks for data with a very small period, the REP only sends the data to that subscriber with its own {{{MinSubscPeriod}}} duration. But in every interval, in can provide a number of data for that subscriber. For example, having a value 5 for this option means that after the {{{MinSubscPeriod}}}, there will be 5 posts of data from the REP to that subscriber based on its request. Changing this value requires a good understanding about the scenario. Otherwise don't modify this option. This value can range from 1 to 10. A value more than 10 can cause long latencies with the service for subscribers.
    175175* {{{DTAPath=/sdcard/ericsson/rep/dta/}}}
    176176  * The path that REP use to store its settings on the SD-card