Changes between Version 4 and Version 5 of AndroidREP
- Timestamp:
- Oct 20, 2010, 7:46:50 AM (14 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
AndroidREP
v4 v5 108 108 The Android SAG is a Sensor Actuator Gateway which collects the data from Android's device sensors and provide them in OGC SWE Observation and Measurements (O&M) format (http://www.opengeospatial.org/standards/om). It also provides a description for each sensor in Sensor Model Language format (http://www.opengeospatial.org/standards/sensorml). This information will be used by a REP. 109 109 110 When you start the SAG, The control panel (CP) will be launched. On top of the CP you can find the log information which shows the current status of the SAG service. On the bottom of the CP, there is an EditTextwhich contains the properties file contents.110 When you start the SAG, The control panel (CP) will be launched. On top of the CP you can find the log information which shows the current status of the SAG service. On the bottom of the CP, there is an {{{EditText}}} which contains the properties file contents. 111 111 By pressing the menu button on your android device, you will access to several operational options. 112 112 … … 186 186 You can also see a list of subscribers by pressing menu and selecting “View Subscribers” option. 187 187 188 At the bottom of the R-CP screen (in the scrollable area), you can find a EditTextarea where the properties file is displayed. In case that you made any changes, you should save and restart the REP by pressing menu and selecting “Save properties and exit” option.188 At the bottom of the R-CP screen (in the scrollable area), you can find a {{{EditText}}} area where the properties file is displayed. In case that you made any changes, you should save and restart the REP by pressing menu and selecting “Save properties and exit” option. 189 189 190 190 If you are using a device with a keyboard (like T Mobile G1) then opening the keyboard will cause the rotation of the screen that sometimes may cause problems with the R-CP. In this case you should exit the program and run it again.