/* module: strings.c */

static char SccsId[] = "@(#)strings.c	1.38";

/* define message strings, no particular order besides numeric */

char *STRXXX="Undefined Error String #@&*!";
char *STR001="Problem accessing digitizer";
char *STR002="Digitizer not at home position";
char *STR003="Digitizer data input error";
char *STR004="Problem controlling digitizer";
char *STR005="Problem accessing DNC link";
char *STR006="DNC link error";
char *STR007="Mill does not support QUILLUP command";
char *STR008="Memory problem, try switching off power and restarting";
char *STR009="Parameter data problem, cannot continue";
char *STR010="Command failed";
char *STR011="Unrecognized command";
char *STR012="Unimplemented command";
char *STR013="No current image";
char *STR014="Image must be filled first";
char *STR015="Warning: VOID longitude";
char *STR016="Number out of range";
char *STR017="Latitude range is too small";
char *STR018="Longitude range is too small";
char *STR019="Invalid latitude period";
char *STR020="Invalid longitude period";
char *STR021="Current image must be saved or cleared";
char *STR022="Cannot open file";
char *STR023="Digitizer sync error (missing)";
char *STR024="Digitizer sync error (misplaced)";
char *STR025="Image has VOID zone, check settings, retry";
char *STR026="Image file error on seek";
char *STR027="Image file error on read";
char *STR028="Image file error on write";
char *STR029="Tabulation of radii (mm/10) in longitude";
char *STR030="Raster refresh error PEBLKWR";
char *STR031="Window manager error";
char *STR032="Error accessing printer";
char *STR033="Warning: voids in image, command gives unexpected results";
char *STR034="Latitude or longitude range of one makes a null surface";
char *STR035="Image data exceeds tool Z range";
char *STR036="Tool diameter out of range";
char *STR037="Already clear";
char *STR038="UNNAMED";
char *STR039="Is Echo Startup Disc inserted?";
char *STR040="Cannot find or create file";
char *STR041="Is Echo Startup Disc inserted and writeable?";
char *STR042="Undefined option";
char *STR043="\nR Lookup Table:";
char *STR044="\nZ Lookup Table:";
char *STR045="Serial           ";
char *STR046="Data Format Type ";
char *STR047="Vertical Range   ";
char *STR048="Horizontal Range ";
char *STR049="Horizontal Offset";
char *STR050="Horizontal Center";
char *STR051="Gauge Height     ";
char *STR052="Gauge Width      ";
char *STR053="Basic Angle      ";
char *STR054="Samples per Frame";
char *STR055="Frames per Image ";
char *STR056="Radius Steps     ";
char *STR057="\nCorrection Lookup Table, samples across, frames down:\n";
char *STR058="You may want to make a new Correction Table";
char *STR059="Standby...Computing new geometry lookup tables";
char *STR060="Error occured while reading file";
char *STR061="Error occured while writing file";
char *STR062="Error in format or length of file";
char *STR063="Enter image name: ";
char *STR064="Ready ? (y/n): ";
char *STR065="Warning HALFSPEED MODE selected";
char *STR066="Geometry initialization error, cannot image";
char *STR067="Digitizing failed, no image made";
char *STR068="Use fscale command for this scale factor";
char *STR069="Warning: negative scale, effect is untested";
char *STR070="Warning: Scaling in sub-range, results may be unexpected";
char *STR071="Warning: Rshift has been altered";
char *STR072="Option specification required";
char *STR073="Warning: Entirely VOID longitude cannot be filled";
char *STR074="Warning: Entirely VOID latitude cannot be filled";
char *STR075="Error during open";
char *STR076="File protection error";
char *STR077="File not found";
char *STR078="Disc is Write-Protected";
char *STR079="Device is not accessible";
char *STR080="Error during file close";
char *STR081="Error with device or window";
char *STR082="Cannot allocate enough memory";
char *STR083="Type CONTROL_C key to stop";
char *STR084="'PASS COMPLETED'\r";		/* for the bridgeport */
char *STR085="Echo> ";					/* command line prompt */
char *STR086="Longitude increment";
char *STR087="Latitude increment";
char *STR088="Repeat terminated by error condition";
char *STR089="Horizontal Horizon Plot";
char *STR090="Horizontal Hemi-Cyl Plot";
char *STR091="Axial View of a Slice";
char *STR092="Cartesian Latitudes";
char *STR093="Cartesian Longitudes";
char *STR094="No options allowed, use 'display -s' command";
char *STR095="Move Mouse, left button to stop";
char *STR096="For menu press and hold right button";
char *STR097="Hold button, select item, release button";
char *STR098="Type a command, 'help' or 'exit'";
char *STR099="Move mouse, middle picks, left stops";
char *STR100="Use fscale command to scale cartesian data sets";
char *STR101="Error reading text string";
char *STR102="Cartesian/Cylindrical and data/command states do not match";
char *STR103="Machining parameters:";
char *STR104="Demo version, command not implemented";
char *STR105="Usage: echodemo image-pathname";
char *STR106="Undefined file header type";
char *STR107="Problem with file header";
char *STR108="Header seek error";
char *STR109="Header read error";
char *STR110="Header value not terminated properly";
char *STR111="Required value not in header";
char *STR112="Header value undefined";
char *STR113="Unexpected VOID";
char *STR114="Improper combination of options";
char *STR115="Step Offset      ";
char *STR116="Resolution Bits  ";
char *STR117="Sample Low Margin";
char *STR118="Sample Hi Margin ";
char *STR119="Server Name      ";
char *STR120="Set-up Date      ";
char *STR121="Unable to read optical configuration file";
char *STR122="Unable to read optical table file";
char *STR123="Optical parameter file seek error";
char *STR124="Optical parameter file read error";
char *STR125="Missing required optical parameter:";
char *STR126="Missing optical data table";
char *STR127="Please Standby - %d%% Complete\r";
char *STR128="                                \r";
char *STR129="Missing required mill parameter: %s\n";
char *STR130="Mill parameter file error";
char *STR131="Environment variable %s not defined\n";
char *STR132="Configuration file not found";
char *STR133="Cannot execute mill interface filter";
char *STR134="Cannot fork mill interface filter";
char *STR135="ECHO_MILL_TYPE incompatible with this command";
char *STR136="Unknown user";
char *STR137="File name must be given";
char *STR138="Environment variable has bad value: %s\n";
char *STR139="Command usage error, see manual";
char *STR140="Sorry, cannot find any information on \"%s\"\n";
char *STR141="References to \"%s\" found, try the manual page for:\n";
char *STR142="Server problem, frame receive";
char *STR143="Optical table format error";
char *STR144="Problem with SunView window system (Not a Sun terminal?)";
char *STR145="Image processing failed, no image made";
char *STR146="Longitude outside of current range window";
char *STR147="Latitude outside of current range window";
char *STR148="Tabulation of radii (mm/10) in latitude";
char *STR149="You must meter a point before clipping";
char *STR150="User Configuration file not found";